28 to 6 AWG Wire Ferrules Crimping Tool, Self Adjusting, Frontal Load, Square Profile - FD2806SQ
SELF-ADJUSTING HIGH PERFORMANCE WIRE FERRULES CRIMPING TOOL
For nearly 29 years, Miromar tools have been the tools of choice for professional tradesmen and end users who are serious about their hand tools and demand quality at an affordable price. Made of quality materials and backed by our warranty and USA based customer service and technical assistance.
FEATURES & SPECIFICATIONS:
- Crimping Range: 28 to 6 AWG (0.08-16.00mm²)
- Standard Ferrules: 28 to 6 AWG (0.08-16.00mm²)
- Twin Wire Ferrules: 22 to 10 AWG (0.50-6.00mm²)
- Crimping Profile: Square
- Maximum Ferrule Crimping Length: 1/2" (12mm)
- Tool Length: 7-1/2" Long
-
Crimping Mechanism: Self-Adjusting Ratchet Style
- Frontal Loading
- Hardened steel frame
- Ergonomically designed handles with comfort grips.
- Estimated life span of <50,000 crimp cycles
- Calibrated at factory for immediate out-of-the-box use
- Tension adjustment knob for longterm adjustment.
- 1-Year Warranty*
- RoHS Compliant
- Available in two color patterns
OPERATING INSTRUCTIONS:
This tool is self-adjusting so unlike the guesswork you have with slotted crimping die sets, it is very simple to use. Just remember the adjustment knob settings!
On the side of the tool you will see an arrow shaped lever that can be turned depending on which crimping range you are working in:
- Arrow pointing forward = the tool crimps 28 to 10 AWG wire ferrules
- Arrow pointing backward = the tool crimps 8 to 6 AWG wire ferrules
The best way to engage the arrow lever is to release the tool so it is in the open position with the handles fully extended. This is the point that you turn the lever to the correct position and then you are ready to crimp! Since the tool has a 12mm frontal crimping cavity, any ferrules longer than that length will not be compatible. We suggest a side-loading crimping tool for these longer ferrules so that they can be fed through for multiple crimping rotations.