Skip to content
Week of August 25th: Due to the ongoing implementation of our internal inventory system upgrade, orders might experience a slight delay in shipment.
Please contact us for any clarification on order status.
Week of August 25th: Due to the ongoing implementation of our internal inventory system upgrade, orders might experience a slight delay in shipment.
Please contact us for any clarification on order status.
FD332 - Rotary Coaxial Cable Stripper - Ferrules Direct

FD332 - Coaxial Crimping Tool, Rotary Style, RG58, RG59, RG62, 1 Piece

$0
$6.90 - $6.90
$6.90
$6.90 - $6.90
$6.90
SKU FD332

Quantity: 1 Piece

Availability:
in stock, ready to be shipped
true
 More payment options

Pickup available at 44900 Acacia Lane, Unit 107

Usually ready in 2 hours

Rotary Coaxial Cable Stripper

Suitable for stripping the following cables:

  • RG-58, RG59, RG62, RG6

Operating Instructions:

Stripping Length: This tool strips cables of three different lengths: 6mm (RG6 - 5C2V), 8mm (RG-58 - 3C2V), and 9mm (RG-59/62 - 4C2V)

Blade's Depth Adjustment: remove the hex wrench stored underneath the tool and insert it into the blade's depth adjuster located at the bottom of the same tool. Rotate the hex wrench clockwise to cut smaller cables, counterclockwise for larger cables. Repeat the same operation for the other blade.

Stripping Procedures:

  1. Use the tip of hex wrench to push the V-block out of the housing. Align the desired value (6, 8, 9 or D) to the triangle ◄ and push the V-block back inside its housing.
  2. Push down the knurled portion of the tool to open stripping jaws.
  3. Insert the cable through the V-block until it rests on the V-shaped cable support.
  4. Release the knurled portion of the tool to close the jaws.
  5. Insert your index finger into the tool's ring and turn the the tool clockwise 1-4 times.
  6. Open jaws and remove the stripped cable.